Contractors

40' Extension Ladder

40' Extension Ladder  Click Here For Instruction Sheet Click Here For OSHA Safety Sheet

Rental Prices

Day- $59.50 / Week- / 4 Hours-

60lb Electric Breaker

60# Electric Breaker DeWalt 25980 Price Includes HD Ext Cord & Transport Cart Bits Extra

Rental Prices

Day- $91.50 / Week- / 4 Hours- $63.75

90 CFM Tow Behind Air Compressor

Air Compressor 90 CFM Air Compressor Hoses not included

Features & Benefits

  • 90 ft³/min @ 100 psi
  • EPA Tier 4 Final
  • Designed in the U.S. by Rental Professionals
  • New quiet Kubota D1105-E4B diesel engine provides reliable, smooth and efficient power
  • Ultra Silent design provides industry-leading quietness
  • Curb-Side Mounted Control Panel provides convenient operation and maximum operator safety
  • Automatic Glow Plug System provides for easy starts in cold weather
  • Minimum Pressure Check Valve on air outputs prevents back-feeding of solids and liquids
  • Compact Size for easy handling and storage
  • Efficient weight allows towing with almost any vehicle

Rental Prices

Day- $135.00 / Week- $540.00 / 4 Hours- $99.00

90lb Pneumatic Hammer

Jet Equipment 90 Lb. Pneumatic Breaker

Manufacturer: Jet
 Jet Industries breakers come in a variety of weights and sizes to suit all applications where hard punching breakers are needed. Requires a towable compressor with a minimum 80cfm @ 100psi.
Bits not included Please Click Here For Instruction Sheet For The Manufacturers Website Please Click Here

Rental Prices

Day- $60.00 / Week- / 4 Hours-

BCS 11hp Power Sweeper

The BCS power sweeper attachment was designed for use in as many ground maintenance applications as BCS could think of. The result: a sweeper engineered to withstand rugged use and provide years of trouble free service - year 'round! The brush assembly is a full forty inches wide and consists of several vinyl bristle sections. The vinyl used to make the bristles is a non-recycled and virgin material, to provide extra strength and durability. The sweeper can be angled in three positions: right, left, and straight forward. There are two gauge wheels mounted to the sweeper housing to control the brush ground clearance. Uses for the power sweeper include: Parking Lot/Sidewalk Cleaning

Rental Prices

Day- $140.00 / Week- / 4 Hours- $124.00

Bobcat S130

Includes up to 8 Hours Of Metered Use Fuel Use Deposit Required Under Massachusetts Law rental of this machine requires a Class 2A Hoisting Engineers License or a Temporary Permit. This law is in effect at every rental center in the state. Please click here for more information Click Here To Apply For A Temporary Hoisting License

Bobcat® skid-steer loaders have a celebrated 50-year history of quality, performance and reliability. Find the best machine for your work with the most skid-steer loader models, attachments and options. More than a dozen skid-steer loader models – including the M-Series – provide the size, features and options you need:
  • Select a radius lift path for top forward reach, or a vertical lift path for the best loading efficiency
  • Purchase or rent Bobcat attachments for your ongoing and one-time jobs
  • Change attachments quickly with the Bob-Tach® mounting system or the optional Power Bob-Tach® mounting system

Performance

We all want to finish faster. With Bobcat skid-steer loaders, you’ll work more efficiently, lift more, turn faster and dig more. Strengthen your performance with loaders that deliver ideal weight balance, stronger hydraulics, quicker cycle times and faster travel speeds.

The Bobcat brand has long been synonymous with compact durability in the home and construction realm. As part of our commitment to providing our customers with the right equipment to get the job done,Marlborough Grand Rental Station is pleased to offer Bobcat rentals to residents in the Marlborough, Hudson, Northborough, Southborough, & Sudbury, MA area, including the Bobcat S130. The front loader Bobcat S130 is the resource you need to handle all of your landscape, garden, construction, or renovation needs in a short amount of time. The versatility of the Bobcat S130’s front bucket allows for scooping dirt, carrying heavy objects, or transporting material across rugged terrain. It is also possible to adorn the front bucket with skid forks so that you can pick transport pallets and storage containers with ease. The integrated Bob-tach system also allows for the attachment of customized implements to handle any job, guaranteeing that you have the resources you need to accomplish your task. If you’re looking for a Bobcat rental stop by Marlborough Grand Rental Station today. Our staff will train you on how to operate the Bobcat S130, and soon you’ll be effortlessly overhauling your property. We look forward to seeing you soon! For the Bobcat S130 Specifications: Click Here

Rental Prices

Day- $285.00 / Week- / 4 Hours-

Brick & Paver Cutter

Brick & Paver Cutter
BON'S PAVER & BRICK BUSTER
  • This unit offers fast and economical cutting of bricks and pavers
  • Cutting blade is 10" wide to allow for cutting angles
  • Height is quickly adjusted with 3-position removable pin and adjustment screw for fine adjustment
  • Hardened cutting blade has three cutting edges to provide longer life
  • Cutting depth is 3 3/8"
 
Instructions Click Here

Rental Prices

Day- $25.00 / Week- / 4 Hours-

Chipper, 12"

Vermeer BC1000XL The Vermeer BC1000XL provides the latest innovations, productivity, operator safety and power efficiency.  Equipped with a 85 hp (63.38 kw) Cummins Diesel, the BC1000XL delivers efficiency to chip through some of your toughest jobs, while the 25-gal (94.6 L) fuel tank cuts the time spent refueling and increases time spent on the jobsite. Patented SmartFeed control system monitors engine performance, and then stops the feed roller as needed. Optional sound abatement package adds an engine shield liner, triple-layer in-feed curtain and a sound-reducing coating . Click here for the operating & safety practices

Rental Prices

Day- $410.00 / Week- / 4 Hours-

Chipper, 6"

Vermeer 4" Wood Chipper Don’t let the small size fool you. The BC625 is a heavy duty disc-style chipper that can process material up to 6”/15 cm in diameter. A 27 hp/20 kW Kohler Command Pro engine and AutoFeed II® system maximize productivity. Operation & Safety

Rental Prices

Day- $250.00 / Week- / 4 Hours- $175.00

Chisel SDS MAX

Chisels SDS Max Chisel Sizes Available:
  • Moil Point                     
  • 1" Flat                     
  • 3" Flat
  • Ground Rod Driver

Rental Prices

Day- $7.50 / Week- / 4 Hours-

Circular Saw

Milwaukee 7" Circular Saw Model 6390-20   Please Click Here For The Operation & Safety Instructions (Blade Is Not Included)

Rental Prices

Day- $20.00 / Week- / 4 Hours- $15.00

Circular Saw Cordless

Circular Saw Cordless circular saw
  • 18 Volts
  • 7.25" Blade (Not Included)
  • 9 Lbs.
  • 5/8" Arbor
  • Max Bevel Capacity 50 Degrees
  • Blade Extra $6-$12
Includes 1-2.0 Amp Hour Battery. Add $3.50 for 4.0 Amp Hour Battery & Charger with a 1 hour charge time Operator & Safety Manual 

Rental Prices

Day- $26.50 / Week- / 4 Hours- $20.00

Concrete Saw 10" Blade

Concrete Cut Saw 10"

Husqvarna K3000 Cut-N-Break

Our Cut-n-Break saw is the natural choice when you need to cut deep from one side of the foundation. The K 3000 Cut-n-Break enables you to cut as deep as 15" from one side, 3" at a time. Suitable for flush cutting close to walls and floors as well as for smaller jobs like window openings where you want to avoid over cutting at the corners. The unique method allows cuts up to 65 mm deep. The two specially designed, high-speed and powerful blades make a core in the saw cut. The core can then easily be broken off, using the accompanying breaking tool. When the core has been broken off, you continue cutting until the required depth is reached. Cut-n-Break is suitable for a wide range of applications. For cutting pipes in pipe trenches, grooves for cabling, and expansion joints and crack repair. It’s perfect for window and door openings where you don’t want over cutting at the corners. And excellent for burying signal cables. Voltage: 110 Volt Weight: 23 Lbs. Decibals: 109 (Ear Protection Required) Wet Cutting Only: Has Injection System Length: 36" Total Cutting Depth: 15"

Concrete Saw Cutting Operating

Rental Prices

Day- $232.50 / Week- / 4 Hours- $180.00

Core Drill Rig

Core Drill Rig Hilti DD150U, Used to drill 2"-8" holes in concrete Price includes: Drill & Stand. Vac pump $30 extra if needed Operating Instructions Note: Diamond Core Bit Not Included in Price
  • Wet drilling with one tool in different base materials without need to change rig components
  • High motor performance and sturdy three-speed gearing for optimum drilling speed
  • Exceptionally user-friendly features and controls
  • 360° adjustable side handle with integrated dust and water management functions
  • Power control LED helps new users to achieve the optimum rate of drilling progress and maximum core bit life
  • Bits Sizes & Price
  • 2" - $50.00
  • 4" - $70.00
  • 6" - $80.00
  • 8" - $90.00
  • Vacuum Pump $30.00

Rental Prices

Day- $165.00 / Week- / 4 Hours-

Cutoff Saw 12" Electric

Hilti DCH 300 12" Electric Cutoff Saw Operators Manual Can be attached to a shop vac dust control Blade not included: DiamondAbrasive Blade

Rental Prices

Day- $75.00 / Week- / 4 Hours- $60.00

Cutoff Saw 14"

14" Cut-Off Saw Blade Rented Separately, Click Here  This is a "Must See" video For safety & Operation Click Here For the Safety Manual & Operating Manual

Rental Prices

Day- $80.00 / Week- / 4 Hours- $56.50

Demo Hammer

Demo Hammer 30Lbs. [With Chisel] Electric Breaker AKA Demo Hammer Hilti TE-1000-AVR Used to:
  • Demolish concrete and masonry at floor level or below waist level
  • Renovate floors of all types
  • Remove tiles, mastics & grout
  • Perform corrective chiseling, such as adjusting door and window openings
Price Includes 1 chisel (1" Flat or a Point) 4" Tile chisel is available for $25.00 6" Tile Smasher $35.00 Add a Demo Hammer Cart for $15 Operating Instructions

Rental Prices

Day- $75.00 / Week- / 4 Hours- $55.00

Diamond Blade 14"

14" Diamond Blade Blade Specs
Type: Concrete Wet/Dry
Power Range 1.5-20Hp
Blade Diameter 14"
Laser Welded Segments
Arbor Size 22MM/1"
Cutting Depth 4.5"

Rental Prices

Day- $55.00 / Week- / 4 Hours-

Diamond Blade Asphalt 14"

14" Diamond Asphalt Blade 14", DH10 Husqvarna Professional Asphalt Segmental Diamond Blade, 14" Diameter x .125" Blade Segment Thickness x 1" Arbor Size With Drive Pin Hole, Wet Or Dry Asphalt, Asphalt Over Concrete, Green Concrete Cutting.

Husqvarna has prepared this guide to help you find, identify and resolve the problems which you may encounter with diamond saw blades.

The majority of problems encountered arise from:
  • the use of a blade not suited to the job,
  • the incorrect use of a blade,
  • equipment faults.
Please Click this Link For Blade Trouble Shooting

Rental Prices

Day- $75.00 / Week- / 4 Hours-

Drill Driver

Drill Driver Cordless Compact 1/2" Drill Driver Specs
  • Voltage 18
  • Length 7.25"
  • Weight 2.9 Lbs.
  • Torque 50 In Lbs.
Includes 1-2.0 Amp Hour Battery. Add $3.50 for 1-4.0 Amp Hour Battery with Charger

Rental Prices

Day- $18.50 / Week- / 4 Hours- $12.75

Drum Sander, Hardwood Floor

Floor Sander The Drum Sander is the leader in rental sanders for one reason . . . it works! · The DIYer can achieve professional results on their own at a fraction of the cost · The Drum Style floor sander is the only machine on the market that will allow the DIY'er to achieve the results they want and expect. Click Here For a Q & A about floor refinishing. Please Read the Operators Manual Here Click Here For A "How To" Refinish Your Floors Web Page

Rental Prices

Day- $52.50 / Week- / 4 Hours-

Drywall Sander

Porter Cable Drywall Sander Model 7800 The 7800 includes Sander, Sanding pad, 13' Static-dissipating 1-1/4" vacuum hose, Hook & loop straps for mounting power cord to vacuum hose,, Instruction manual, Vacuum not included.

Rental Prices

Day- $60.00 / Week- / 4 Hours- $48.00

EDCO Concrete Floor Grinder

Concrete Floor Grinder 

EDCO Grinders - Proven in over 50 years of use. Accept no substitute!

  • 11" Working width will grind approximately 200-250 sq. ft. per hour at 1/32" with EDCO Dyma-Serts
  • Round shroud gets tight against walls
  • Easy-rolling 10" steel-core, rubber wheels
  • Lifting eye for easy loading and unloading
  • Includes 1 multi-accessory discs, which accept Dyma-Serts, Strip-Serts and all other grinder accessories
  • 3 grinding accessories required per loading
  • 2" Vacuum port and water port
  • 25ft. Power cord attached with cord hanger
  • Accessory Toolbox tray
  • Side-mounted lifting handles
  • Easy access to grease fittings
  • 30lb. weight pack standard
  • Rugged and easy to maintain

Ideal for:

  • Areas less than 1,500 square feet
  • Residential applications
  • Grinding concrete
  • Repairing damaged concrete slabs
  • Removing urethanes or epoxy thin-coats
  • Leveling high spots or surface imperfections
  • Smoothing rough surfaces, rain marks or trowel marks
  • Removing mastics, thin-sets, paint build-ups, resins and more
Please Click Here For Operators Manual

Rental Prices

Day- $165.00 / Week- / 4 Hours- $125.00

Edger, Hardwood Floor

Supplies not included

Rental Prices

Day- $26.00 / Week- / 4 Hours-

Floor Nailer

Floor Nailer Click Here For Operating Instructions Description Primatech EXPERT Pneumatic 250 Adujstable base nailer & stapler is designed for the installation of 5/8’’ to 7/8’’ (16 to 22mm) Solid or Engineered hardwood floors : Domestic and Exotic species. Its Primpact Powered and compact all-around striking surface enable the closest reach to the end wall of the flooring site.   Application Application3/4’’ (19mm) factory adjusted 5/8’’ to 7/8’’ (16 to 26mm) Note: Requires Compressor & Air Hose

Rental Prices

Day- $42.50 / Week- / 4 Hours- $32.00

Floor Stapler

Floor Stapler Hardwood Floor Stapler, uses 1-1/2" Staples(Sell by the strip) Operation & Safety Sheet Click Here Full Manufacturer's Manual Here Compressor required Click Here

Rental Prices

Day- $42.50 / Week- / 4 Hours- $32.00

Floor Stripper

Floor Covering Stripper  The FCS Series RIP-R-STRIPPERS® have revolutionized the industry with their innovative design and operational features. Quickly remove VCT tiles, rubber-backed carpeting and sheet type coverings from wood and concrete surfaces. Welded, unitized frame. Adjustable operator handle folds for transport. Direct-drive, random orbit action; 14 lbs external weight. Blade Not Included Tile 4" x 6" straight blade Carpet 3" x 10" straight blade Spec Sheet Operating Instructions

Rental Prices

Day- $60.00 / Week- / 4 Hours- $50.00

Floor Stripping 17" Disc

Floor Stripping Tungsten Carbide Floor stripping disc, 17" Removes:
  • Paint
  • Carpet Adhesive
  • Tile Adhesive
  • Carpet Padding Adhesives
  • Epoxy Coating
  • Approximately 5K square feet
Use sand on floor when using to remove carpet foam backing and carpet adhesives to keep stripped product from adhering to disc.

Rental Prices

Day- $50.00 / Week- / 4 Hours-

Generator 3250W Gas

Generator 3250W
Running/Starting Watts:3250/3750, Fuel Tank Capacity: 3.5 gal, Run Time @ 50% Load: 9.7, Hours, Unleaded Gasoline, Starting Method: Recoil/Pull Start, Outlet Types: (2) 5-20R Duplex, (1) L14-20R Click Here For Operation & Safety Manual

Rental Prices

Day- $50.00 / Week- / 4 Hours- $40.00

Grinder 4"

Milwaukee 4" Hand Grinder

Rental Prices

Day- $20.00 / Week- / 4 Hours- $15.00

Grinder 4" Cordless

Grinder 4" Cordless Hand Held Grinder Specs
  • Weight 6.5 Lbs
  • Length 15.25"
  • RPM's 8500
Grinder supplies maximum sustained power to complete the toughest grinding, surface preparation and cutting applications.

Rental Prices

Day- $26.50 / Week- / 4 Hours- $18.50

Hammer Drill

Milwaukee Hammer Drill 1/2" Drive with reverse Model 5378-20

Rental Prices

Day- $25.00 / Week- / 4 Hours- $20.00

Hammer drill cordless

Hammer Drill Cordless Hammer Drill Specs
  • Voltage 18
  • Weight 3.5 Lbs.
  • Length 7.75"
  • Torque 1200 Inch Lbs.
  • Chuck 1/2"
Includes 1 Lithium Battery, 2.0 Amp Hours of run time. 4.0 Amp Hour Battery add $3.50 (Includes Charger)
The M18 FUEL™ Hammer Drill  is the Most Powerful 18-volt cordless drill on the market. The POWERSTATE™ Brushless Motor delivers up to 1,200 in-lbs of torque and up to 2,000 RPM, providing faster drilling speed under heavy load to increase productivity. At only 7.75” in length, it is the Most Compact drill in its class, reducing fatigue when used for extended periods of time and allowing access
to tight work spaces. REDLINK PLUS™ intelligence ensures maximum performance and protection from overload, overheating and over-discharge. The REDLITHIUM XC5.0™ Battery Pack delivers more work per charge and more work over the life of the pack than the competitors. The M18 FUEL™ Hammer Drill’s all-metal ratcheting locking chuck provides maximum grip, bit retention and durability.

Rental Prices

Day- $27.50 / Week- / 4 Hours- $18.50

Hammer Drill Hilti

Hammer Drill

Hilti TE 70-ATC Combihammer

  • 380 r.p.m for extra drilling performance (std. in this class: approx. 280 r.p.m)
  • Optimized mechanical clutch for maximum torque transfer
  • Less tiring to use as less contact pressure is required
  • Center of gravity close to the grip for optimum balance
  • Glass-fiber reinforced housing parts for ruggedness and long life
  • Hammer drilling, 22 to 150 mm dia.
  •  
  • Drilling holes for heavy-duty anchors, 20 to 40 mm dia.
  •  
  • Penetrations up to 80 mm dia.
  •  
  • Breaching and demolition with pointed and flat chisels
  •  
  • Working with wide-flat, hollow, mortar or channel chisels and bushing tools
  •  
  • Drilling with high torque in wood and steel
Drill Bits For Concrete Drilling 1/2" X 14"     $15.50 1" X 21"        $15.50 1 1/2" X 21"  $20.50 2" X 22"       $22.50 2 5/8' X 22 Core  $28.50 3" X 22" Core      $28.50 4" X 17" Core      $33.50 Chisels 5.00 Each

Rental Prices

Day- $65.00 / Week- / 4 Hours- $50.00

Hammer Drill Lg

Applications
  • Drilling holes for heavy-duty anchors, 3/4" to 1-3/4" diameter
  • Drilling holes for heavy-duty anchors, 3/4" to 1-3/4" diameter
  • Drilling for heavy-duty anchor holes from 3/4" - 1-1/2" diameter
  • Drilling with high torque in wood and steel
  • Hammer drilling in concrete, masonry and natural stone using drill bits in the 1/2" - 4" diameter range
  • Drilling holes for heavy-duty anchors 3/4" - 1 3/4" in diameter
 

Features

  • High rotation speed (360 rpm) for maximum drilling performance
  • Optimized mechanical clutch for maximum torque transfer
  • Center of gravity close to the grip for optimum balance
  • The unique Active Torque Control (ATC) stops the motor almost instantly if the bit binds and the housing begins to rotate too quickly, reducing the potential of sudden rotation of the combihammer about its own axis
  • Glass-fiber reinforced housing parts for ruggedness and long life

Rental Prices

Day- $65.00 / Week- / 4 Hours- $50.00

Heater 135K BTU Kerosene

Heater 135K BTU Kerosene  Multi-Fuel, runs on Kerosene, Diesel or home heating oil.   Duraheat, 125,000 BTU, Kerosene Portable Forced Air Heater, With Thermostat, Heats Up To 3,000 SQFT, 10 Gallon Fuel Tank, 520 CFM, Digital Diagnostics & LED Temperature Indicator, Threaded Axle System, Flat Free Cold Weather Tires, 2 Lift Handles, Auxiliary Power Outlet, & Run Time Fuel Gauge, Convenient Drain Plug, On/Off Switch, Includes UL Listed Large Capacity Motors & Fuse Protected Electrical System, All Components Are Securely Fastened Into Chassis To Insure Long Life, Utilizes Heavy Duty Spark Technology For In Field Endurance. Multi-Fuel Capable, Has Been Factory Tested To Operate With 1,000 BTU Kerosene, #1 & #2 Fuel Oil & Diesel, Jp-8 & Jet-A Fuels. Kerosene Sales Purchase Price $349.99 Please Click Here For Operating & Safety Instruction Manual

Rental Prices

Day- $45.00 / Week- / 4 Hours- $32.50

Heater 180K BTU Multi-Fuel

Indirect Heater (Clean Air Heater) 180K BTU Kerosene This heater will operate on diesel, kerosene, or #1-#2 home heating oil [Fuel Not Included] 
  • Heat exchanger to keep exhaust gas and heated air separate
  • Large capacity diesel fuel tank provide hours of continuous operation
  • Allows for heater placement outdoors with clean heated air directed indoors
  • Includes The Following Accessories:
  • Thermostat for constant temperature control
  • Heavy duty duct pipe
  • Automatic safety and control devices                                                                                             
                            Click Here for Kerosene                  Click Here for the Safety & Operation

Rental Prices

Day- $165.00 / Week- $625.00 / 4 Hours-

Heater 200K Propane Construction Style

Propane Heater Construction Style to 200K BTU, Propane Fired Not for residential use! Click here for residential use heater Purchase Price $149.99 Click Here for Propane Tank Chart Operation & Safety Manual
Dura Heat 200K LP convection heater offers inexpensive solutions for temporary heat on the job.  Requires no electricity and burns clean with propane(LP) fuel.  The 200K is the largest of the LP convection "trash can" heaters and can heat large workspaces.
FEATURES:
  • 360 Degree output convection heater
  • Variable output (75,000-200,000 BTU's)
  • Simple operation
  • 10 Ft. hose and regulator included
  • Propane(LP) gas only
  • No electricity required
  • Runs up to 28 hours on one 100lb. propane(LP) gas cylinder
SPECIFICATIONS
Fuel Type: Propane Gas (LP)
Temperature Control: Variable
BTU Output: 200,000
Electricity Required: no
Heating Area: 4,700 sq ft
Length: 16in
Width: 16in
Height: 26.25in

Rental Prices

Day- $42.50 / Week- / 4 Hours- $32.50

Heater 220K BTU Kerosene

Heater 220K BTU 
Uses include, workspace, construction sites
FEATURES:
  • Multi-fuel capable - K-1 kerosene, #1 and #2 fuel oil and diesel, JP-8 and Jet-A fuels
  • Dual high/low heat 180,000/220,000 BTU settings can minimize fuel consumption
  • LED digital temperature indicator and diagnostics
  • Large capacity fuel tank
Please Click Here For Operating & Safety Instructions 
 5 Gallon Kerosene $44.95

Rental Prices

Day- $60.00 / Week- / 4 Hours- $45.00

Hepa 500 Air Scrubber

DefendAir HEPA 500  Powerful air scrubber and negative air machine   Product Features
  • Built-in Microban® antimicrobial product protection to inhibit the growth of odor and stain causing bacteria, mold and mildew in this machine.
  • Advanced filtration technology
  • Daisy chain capability - link up to 3 units on 1 power outlet
  • Variable CFM on each unit - up to 1500 CFM per 15-amp circuit
  • Stackable, lightweight, and easily transportable
*Filters not included in rental price. HEPA Filter - $199.95 Carbon Filter - $25/day Furnace Filter - $4.95

Rental Prices

Day- $94.00 / Week- $260.00 / 4 Hours-

Hose 2" Discharge

Hose 2" Discharge Fits our 2" electric and gas powered pumps 2" x 50', PVC Discharge Coupled M x F Short Shank Assembly, A PVC Discharge Hose For Water Pumping In The Agricultural, Rental, Construction, Marine, & Irrigation Industries, A Smooth Bore Hose Made Of Flexible Abrasion Resistant Extruded PVC With A Rigid PVC Helix, Male x Female Aluminum Short Shanks With Band It Clamps, Thickness 2" ID, Working Pressure 60 LB, Temperature Range -10 Degrees Fahrenheit To 130 Degrees Fahrenheit.

Rental Prices

Day- $16.50 / Week- / 4 Hours-

Impact Driver Cordless

Impact Driver Cordless Impact Driver Cordless Compact 1/2" Drill Driver Specs
  • 1/4" Hex
  • Voltage 18
  • Length 7.25"
  • Weight 2.9 Lbs.
  • Torque 500 In Lbs.
Includes 1-2.0 Amp Hour Battery. Add $3.50 for 1-4.0 Amp Hour Battery with Charger Drive Bits Not Included

Rental Prices

Day- $18.50 / Week- / 4 Hours- $12.50

Knee Kicker


Rental Prices

Day- $15.00 / Week- / 4 Hours- $10.00

Laser Level

Laser Level Porter Cable Model RT 7690-2 Instruction Manual Click Here Complete Kit Including, Tripod, Remote Control, Batteries, A/C power Adapter & Carry Case

Rental Prices

Day- $75.00 / Week- $220.00 / 4 Hours- $60.00

Material Lift

Material Lift
  • Compact Storage
  • Easy To Load
  • Easy To Transport
  • Easy To Use
  • Fast Action Stabilizer Legs
  • Lockable Caster Wheels
  • Reversible Forks For Added Height
  • Fork Extensions Available (Additional Charge)
  • Lift Capacity: 650 lbs Max
  • Lift Height: 16' Max
  • Weight: 298 lbs
  • Stowed Dimensions 63" x 35" X 31"

Rental Prices

Day- $68.50 / Week- / 4 Hours-

Milwaukee Drill

Milwaukee Model 0234-1 1/2" Variable Speed Drill With Reverse

Rental Prices

Day- $15.00 / Week- / 4 Hours- $10.00

Mini Excavator w/Thumb, John Deere 17D

Rental Rate Includes up to 8 Hours Of Metered Use Fuel Use Deposit Required John Deere Mini-Excavator with hydraulic thumb

FEATURES & SPECS
  • Final Tier 4-certified engine
  • Reduced tail swing
  • Variable-width undercarriage
  • Arrives attachment ready
  • Hydraulic thumb
Net Power 11.0 kW (14.8 hp) @ 2,400 rpm
Max. Digging Reach 3.90 m (12 ft. 10 in.)
Max. Digging Depth 2.17 m (7 ft. 1 in.)
Operating Weight 1893 kg (4,173 lb.)

Under Massachusetts Law rental of this machine requires a Class 2A Hoisting Engineers License or a Temporary Permit. This law is in effect at every rental center in the state. Please click here for more information Click Here To Apply For A Temporary Hoisting License

John Deere Mini-Excavator with hydraulic thumb

Rental Prices

Day- $325.00 / Week- / 4 Hours-

Miter Saw

Compound Miter Box Saw 10" Blade with Laser for accuracy

Rental Prices

Day- $45.00 / Week- / 4 Hours- $36.00

Mud Sucker 3"

Mud Sucker  3" Diaphragm Pump Includes 1 Suction Hose & 1- Discharge Hose Discharge Bore: 3 inches Engine: 4 HP Solids Handling: 1.75 Weight: 155 lbs

Rental Prices

Day- $65.00 / Week- / 4 Hours- $52.50

Orbital Floor Sander

Orbital Floor Sander Also Know as an Orbital Square Buff or Square Buff
The random-orbital sanding action of the OBS-18 removes the scratch patterns left by drum or rotary sanders, leaving a smooth , flat floor ready for refinishing. The OBS-18 is perfect for interim "screen and recoat" sanding jobs. Click Here for Operating Instructions

Rental Prices

Day- $65.00 / Week- / 4 Hours- $50.00

Orbital Sander

5" Orbital Sander Uses 8 Hole Paper

Rental Prices

Day- $17.50 / Week- / 4 Hours- $13.50

Paint Sprayer Airless

Airless Paint Sprayer

Light to Heavy Thickness Materials

Stains, varnishes, primers, enamels, polyurethane, acrylics, oil-based paints and latex paints. Operating & Safety Instruction Manual The RentalPro 230 is a solid workhorse sprayer with performance points to cover both interior and exterior painting needs. Lightweight and portable, easy to use and easy cleanup after your project Features
  • Lightweight / Compact Design - one-hand Fold-N-Store cart design, single handle allows cart to fold into compact package for easier transport or storage
  • Proven Endurance Pump with Long-life V-Max Packings, Chromex Rod and Hardened Stainless Steel Cylinder equates to less downtime
  • Consistent Pressure Control with simple mechanical design for years of rental ready use and double-seal design keeps moving parts isolated from paint
  • Reliable DC Motor runs quiet and allows you to run long extention cords
  • Power Flush Cleaning - Simply connects to garden hose to clean the pump, hoses, and gun in minutes!
  • QuikAccess intake valve to easily clean or clear debris – keeps the customer spraying
Ideal Uses Spraying interior walls and ceilings, fences, houses, barns, decks, rental properties, and commercial buildings

RentalPro 230: 261904 (120V) Specifications:
  • Max. Tip Size: .023 in
  • Max. Delivery Rating: .54 gpm (2.0 lpm)
  • Max. Operating Pressure: 3300 psi (227 bar)
  • Weight: 65 lb (29.5 kg)

Rental Prices

Day- $103.50 / Week- / 4 Hours-

Palm Sander

Milwaukee 4" Palm Sander

Rental Prices

Day- $13.50 / Week- / 4 Hours- $10.00

Panel/Drywall Lift

Panel Lift Make Your Drywall lifting needs easy with this piece of equipment with a 12' reach. 15' With additional Extension $20 extra Click Here For Safety Sheet  Download Panel Lift Safety & Operating Instructions

Rental Prices

Day- $45.50 / Week- / 4 Hours- $35.50

Parking Lot/Athletic Field Line Stripper

Paint Not Included

Rental Prices

Day- $15.00 / Week- / 4 Hours-

Plate Compactor

Plate Compactor Mode: Stone SFP3000A 18" X 24" Plate Operation & Safety

Rental Prices

Day- $75.00 / Week- / 4 Hours- $60.00

Plunge Router


Rental Prices

Day- $20.00 / Week- / 4 Hours-

Pneumatic Hammer 60 Lb.

Jet Equipment 60 Lb. Pneumatic Breaker

Manufacturer: Jet
 Jet Industries breakers come in a variety of weights and sizes to suit all applications where hard punching breakers are needed. Requires a towable compressor with a minimum 80cfm @ 100psi.
Bits not included Please Click Here For Instruction Sheet

Rental Prices

Day- $55.00 / Week- / 4 Hours-

Pneumatic Hammer Bits

Chisels For electric & Pneumatic breakers Excludes 5" Chisel (14.50)

Rental Prices

Day- $10.50 / Week- / 4 Hours-

Post Hole Auger 2 Man (General)

M330H TWO MAN HOLE DIGGERS
The Comfort-Flex® composite operator handles flex under load to help absorb vibration and schock. Increased safety in the event of contact with an underground utility line. Heat-treated spur gears are precision machine-cut, deliver unequated torque and horsepower. All-metal centrifugal clutch, oil-cooled to extend life, slips on overload or sudden contact with buried obstructions. Magura twist grip throttle control. Bit is additional Click Here
POWER SOURCE Type: GXV160 Honda,4 Stroke Horse Power: 5.5 HP Starter: Hand rewind Fuel: Gasoline, unleaded automotive grade TRANSMISSION Type: Totally-enclosed,spur geared, double reduction oil bath lubricated Nominal Auger Rotation Speed: 3600 RPM, 144 rpm, no load Clutch: 3" (76mm) diameter all-metal automatic-centrifugal, slips on overload. Drive shaft Connection: 1-3/8" (35mm) Hexagon Maximum Drilling Torque: 190 ft. lbs. (74 N.m) AUGER Diameter: 8" (Included in price) or 12" add $12.00 extra Extention: 15" $5.00 Extra (Non-flighted plain tube, depth to 45") Click Here For the completed Manufacturers Instruction Manual Click Here For The Short Version

Rental Prices

Day- $99.00 / Week- / 4 Hours- $70.00

Post Hole Auger Bit 8" & 12"

Auger Bit For 2 Man Post Hole Auger 8"X36" @ $8.00 12"X36" @ $12.00

Rental Prices

Day- $8.00 / Week- / 4 Hours- $6.00

Prep 16 Concrete Floor Grinder

Prep 16 Concrete Grinder Scarifies (Removes paints, epoxies, & mastics) For Wood Floor Sanding Too! The Onfloor® 16 multi-surface machine is designed for resurfacing concrete floors, restoring or preparing wood decks and hardwood floors. Unique belt drive, three-head system is designed for smooth operation with superior results. Patented counter-rotating heads make this machine easy to operate and control with no sliding.

Rental Prices

Day- $175.00 / Week- / 4 Hours-

Prep 16 Concrete Floor Scarifier

Concrete Floor Grinder The Onfloor® 16 multi-surface machine is designed for resurfacing concrete floors, restoring or preparing wood decks and hardwood floors. Unique belt drive, three-head system is designed for smooth operation with superior results. Patented counter-rotating head; lines make this machine easy to operate and control with no sliding. Please Click Here For Operating Instructions Check Out This Video. Shows The Prep 16 in Action!

Rental Prices

Day- $155.00 / Week- / 4 Hours-

Prep 16 Vacuum


Rental Prices

Day- $30.00 / Week- / 4 Hours-

Prep 16 Wood Floor Sander

The Onfloor® 16 multi-surface machine is designed for resurfacing concrete floors, restoring or preparing wood decks and hardwood floors. Unique belt drive, three-head system is designed for smooth operation with superior results. Patented counter-rotating head; lines make this machine easy to operate and control with no sliding. Paper not included

Rental Prices

Day- $70.00 / Week- / 4 Hours-

Ramp, Aluminum

8' Aluminum Ramps
FOLDING RAMPS- ALUMA-RAMPS
The folding Aluma-Ramps are all aluminum and lightweight. They come with a durable, perforated surface. Handles are built in for easy transportation. These ramps are cost efficient and maintenance free. They fold down to 4’ for easy storage and transport. Folding Aluma-Ramps have a capacity of 1,000 lbs. per pair.
Available in 8’ length, 10” width
USES:
  • Loading & Unloading Equipment
  • Lawn and garden
  • All terrain vehicles

Rental Prices

Day- $26.00 / Week- $78.00 / 4 Hours- $13.00

Reciprocating Saw

Reciprocating Saw/Sawzall 12A, Lightweight Sawzall, 3/4" Blade Stroke, Quick-Lok Blade Clamp, Trigger Speed Control 0-3,000 SPM, 8' Rubber Cord Operating Instructions

Rental Prices

Day- $25.00 / Week- / 4 Hours- $18.00

Right Angle Drill

Milwaukee Model 1107-1 Right Angle Plumbers Drill

Rental Prices

Day- $25.00 / Week- / 4 Hours- $20.00

Sawzall Cordless

Reciprocating Saw Cordless Sawzall Specs
  • Volts 18
  • Weight 8.9 Lbs.
  • Length 19"
  • Fuel Gauge on Battery
Blades Not Included

Rental Prices

Day- $26.50 / Week- / 4 Hours- $18.50

Siding Sander

Siding Sander  
Porter Cable Siding Sander Model 7403
    • 8 Amp motor, AC only
    • Variable-speed dial 3,300-4,500 rpm
    • Fast, uniform, controlled removal of paint from wood, compositions, many other surfaces
    • Vertical and horizontal adjustments for uniform removal
    • Uses tungsten carbide discs of 24, 36, 46 grit
    • 100% ball bearings
  • Adjustable side handle mounts right or left

Rental Prices

Day- $23.50 / Week- / 4 Hours- $18.00

Suction Cup 3

Vacuum Suction 3 Cup
Universal Vacuum Cup for handling all kinds of loads. Makes working with unwieldy parts quicker and more effective. Suitable for all materials with smooth, flat, airtight surfaces such as glass and plastic.
Carrying capacity: 220 lb (100 kg), 3 suction cups Ø 4 3/4" (120 mm)

Rental Prices

Day- $18.00 / Week- / 4 Hours- $10.00

Tile Saw 10"

10" Tile Saw 1-1/2hp Handles 24" tile and 18" Diagonal cut. The MK-101 Series of saws features a powerful, high torque motor for improved performance to tackle all cutting jobs. The one-piece unitized steel frame is built for increased durability. The covered linear guide bar system provides precise cutting on the entire length of the cut. The blade guard has been engineered to provide optimal water flow and is wide enough to accommodate a profile wheel. Includes A Tile Blade. Brick & Block Blade add $10.00.

Rental Prices

Day- $75.00 / Week- / 4 Hours- $60.00

Undercut Saw

Crane 812 Super Saw The Super Saw now has the most features and power available of any undercutting saw. The 13 AMP motor and 6 1/2" diameter flush-cutting blade can fully undercut the inside corner even in extremely tight areas. Doors as thick as 1 3/4" can be undercut without removal. Blade height is adjustable from a flush cut to a maximum of 1" off the floor. The vacuum fitting for dust control can save a lot of clean up (vacuum not included). The retractable stabilizer provides a smooth, solid feel under load. Operating Instructions(Printable) Manufacturers Website 

Rental Prices

Day- $32.50 / Week- / 4 Hours- $24.50

Vacuum For Drywall Sander

Vacuum For Drywall Sander A Micro-Fiber Debris Bag is Required at an additional $11.99

Rental Prices

Day- $30.00 / Week- / 4 Hours- $24.50

Vacuum for Grinder


Rental Prices

Day- $30.00 / Week- / 4 Hours-

Wallpaper Steamer

Wallpaper Steamer Remove wallpaper quicker and easier. Use the perforator if you have painted, multiple layers or vinyl wallpaper. Please Click Here For Operation & Safety Instructions.

Rental Prices

Day- $36.50 / Week- $140.00 / 4 Hours- $25.00

Wet/Dry Vac

12 Gallon 5Hp Shop Vac....Click Here For The Operating & Safety Instructions
  • Cord Length: 12 Feet
  • Operation Sound Level: Super Quiet
  • Hose Size: 2.5" Diameter
  • Warranty: 3 Years
  • Tank Drain
  • Lock-on Hose
  • Blower Feature
Use wet or dry. Bags 10.00 extra

Rental Prices

Day- $30.00 / Week- / 4 Hours-

WetCheck Moisture Sensing Meter

The Wet Check Moisture Meter Shows customers how to measure moisture in their carpet themselves and help them understand what's wet and what's dry. Free when renting a Dehumidifier or Ace Turbo Air Mover

Rental Prices

Day- $5.00 / Week- / 4 Hours-